Permanent Jewelry Welder, 80A 600W Electric Jewelry Spot Welder 110V Handheld Spot Welding Machine, Gold Silver Platinum Soldering Spot Welding Equipment Adjustable 0.02-0.06inch

DetailsFoot Switch: The precision of spot welding can be improved by controlling the welding time by foot switch to prevent interference with hand operation.Non-slip Foot Pads: The four anti-skid foot pads at the bottom realize stable placement during machine operation and prevent the table top from being scratched.Application600W 80A Jewelry Spot Welder can be used for the rapid welding of platinum, gold, K gold, silver, and steel. It is mainly used for welding the ring clasp of the jewelry. Workpieces such as metal plates and tubes cannot be welded.How to Operate1. Connect the power cord.2. Install the hand-held welding gun/pedestal, fixture, foot switch, and tungsten needle in turn3. Turn on the power switch.4. Adjust the height of the tungsten needle(the welding head should extend about 1.96in.).5. Adjust the coarse tune knob and fine tune knob.6. Adjust welding distance.7. Hold the workpiece with the fixture.8. Step on the foot switch with your foot (move your foot away quickly), and the spot welding is completed.SpecificationsMaterial: Sheet MetalColor: BlueModel: 80AWelder Type: Electric Spot WelderPower: 600WPlug: US StandardWelding Range: 0.5-1.5mm/0.02-0.06inInput Voltage: 110 VProduct Size: 25.5*24.8*13cm/10*9.8*5.1inPacking Size: 37*28*18cm/14.56*11.02*7.08inGross Weight: 4.9kg/10.8lbsPackage Included1 x Jewellery Spot Welding Machine1 x Power Cord1 x Foot Switch1 x Tungsten Needle1 x Fixture1 x Hand-held Welding Guns1 x Pedestal1 x English ManualOther Accessories for UseNotesPlease allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement.

• 👍【Strong and Durablility】Thickened sheet metal shell, surface paint treatment, strong, wear-resistant, rust-proof, effective protection of the internal components, prolonging the service life. Good welding effect: Utilizing plasma high-frequency discharge principle, a high-temperature arc is generated between the workpiece and the tungsten needle, which instantly forms a molten pool at the metal welding junction, resulting in smooth, firm, fast and efficient welding.
• 👍【Easy to Carry】Light weight, small size, with a carrying handle on the top, convenient for you to carry it when you go out to work. Easy to use: One-touch power switch, clearly graduated adjustment knob and recognizable operation interface make you easy to use. Quick soldering of platinum, gold, karat gold, silver and steel. Mainly used for soldering jewelry rings. It is not possible to weld workpieces such as metal plates and tubes.
• 👍【Two Operation Modes】According to the specific workpiece and your operation habit, we provide hand-held welding torch and welding torch with bracket for you to choose and change. Intelligent Adjustment: According to the size of the workpiece, welding spot and process requirements, you can precisely adjust the output current by coarse adjustment knob and fine adjustment knob.
• 👍【Good Heat Dissipation】There are many heat dissipation holes on the machine to ensure stable welding performance and prevent the machine from being burned out after long-term operation. Foot switch: The welding time is controlled by foot switch, which can improve the precision of spot welding and avoid interfering with hand operation. Non-slip feet: Four non-slip feet on the bottom of the machine realize stable placement and prevent scratches on the tabletop during operation.
• 👍【Note】Before using the permanent jewelry welder, check whether the power supply meets the operating voltage. Connect the output wire of the welding machine to the screw of the corresponding polarity (tighten the nut when connecting the output wire to the output polarity). Please don't step on the foot switch for a long time. Step on it and move away immediately. If the switch is pressed for a long time and the machine is in a short circuit state, the internal circuit will be burned.